車輛是需要定期更換變速箱油的，長期不更換的話，會影響到車輛的正常行駛。手動擋車輛變速箱油的更換周期一般在4至6萬公里左右，自動車輛變速箱油的更換周期一般在6至8萬公里左右。
The vehicle requires regular replacement of the transmission oil, and if not replaced for a long time, it will affect the normal driving of the vehicle. The replacement cycle for transmission oil in manual vehicles is generally around 40000 to 60000 kilometers, while the replacement cycle for transmission oil in automatic vehicles is generally around 60000 to 80000 kilometers.
更換
濟南變速箱油的三大禁忌也就是三大注意事項，三大注意事項如下：
The three Ikh Khorig for changing Jinan transmission oil are the three precautions, which are as follows:
1、不要更換上劣質的變速箱油，劣質的變速箱油中含有過多的雜質，這樣變速箱在工作的時候，零部件會受到嚴重的磨損；
1. Do not replace with inferior transmission oil, as it contains too many impurities, which can cause severe wear and tear on the components of the gearbox during operation;
2、在更換變速箱油之前，需要放出廢油，對變速箱的油底殼進行清洗，后再換上新變速箱油，這樣變速箱油才會更加的干凈，使用壽命也會更長一些；
2. Before replacing the gearbox oil, it is necessary to drain the waste oil, clean the gearbox oil pan, and then replace it with new gearbox oil. This will make the gearbox oil cleaner and have a longer service life;
3、更換完變速箱油后，需要對變速箱零件上的油泥進行清潔，油泥沒有及時清理的話，那變速箱的運作會受到一些影響。
3. After replacing the transmission oil, it is necessary to clean the oil sludge on the transmission parts. If the oil sludge is not cleaned in a timely manner, the operation of the transmission will be affected.
變速箱油有兩種更換方法，一種是重力法，另一種是循環機法，這兩種更換方法各有各的優點和缺點，根據實際情況選擇合適的方法。
There are two replacement methods for gearbox oil, one is gravity method and the other is circulating machine method. Each method has its own advantages and disadvantages, and the appropriate method should be selected based on the actual situation.
重力換油也叫做手動換油，操作較為簡單，所需費用并不高，且不需要消耗較多的變速箱油，但是換油率會比較低。
Gravity oil change, also known as manual oil change, is relatively simple to operate, does not require high costs, and does not require a significant amount of transmission oil consumption, but the oil change rate will be relatively low.
The oil change rate of the circulating machine is relatively high, reaching over 90%. However, during the replacement process, it requires more oil consumption and the cost will also be higher. If there are any other matters, please come to our website http://m.mmolords.cn consulting service
